Driving Tips

Automotive Engineering Driving Tips 1 month ago

Fill Up Less, Drive More: The Complete Guide to Saving Fuel on Every Trip

Fuel costs are on everyone's mind. As drivers, we all yearn for that magical gas station visit where the pump seems to tick slower. But achieving maximum fuel economy isn't just about wishing on an empty tank. It's about understanding how your car uses fuel and implementing smart strategies to stretch every drop.

489 views

4 mins read

Automotive Engineering Driving Tips 3 months ago

Idle Dilemma: Drive or Neutral at Traffic Lights?

You’re driving your car on a busy road, and you come to a red light. You stop and wait for the green signal, but you wonder: should you leave your car in Drive or switch to Neutral? You’ve heard different opinions from your friends and family, and you’re not sure what’s best for your car and the environment. Is idling in Drive bad for your engine? Does Neutral save fuel and reduce emissions? Or are these just myths and misinformation?

1144 views

3 mins read

Automotive Engineering Driving Tips 6 months ago

How to Avoid and Handle a Hydroplaning Vehicle: A Complete Guide

Hydroplaning is a dangerous situation that can happen when you are driving on wet roads. Hydroplaning occurs when your tires lose contact with the road surface and glide on a thin layer of water. This can cause you to lose control of your car and skid or slide across the road. Hydroplaning can lead to serious accidents and injuries, especially if you are driving at high speeds or in heavy traffic.

1087 views

3 mins read

Automotive Engineering Driving Tips 6 months ago

How Low Can Tire Pressure Be Before It Becomes Unsafe to Drive? (And Which Tires Can Still Go Flat?)

Tire pressure is the amount of air that is inside your tires. It is measured in pounds per square inch (PSI). Tire pressure is important because it affects the safety, performance, and fuel economy of your vehicle.

674 views

4 mins read

Automotive Engineering Driving Tips 6 months ago

How to Drive Safely on Slippery Roads: A Comprehensive Guide

Driving on slippery roads can be challenging and dangerous. Slippery roads are roads that have less traction or grip than normal roads. This can make it harder to control your car and increase the risk of skidding, sliding, or crashing. Slippery roads can be caused by various factors, such as rain, snow, ice, mud, oil, or gravel.

1421 views

4 mins read

Automotive Engineering Driving Tips 6 months ago

Why Does My Car Go Faster Than the Speed Limit?

The speed limit is the maximum legal speed that you can drive on a certain road. The speed limit is set by the government or local authorities to ensure the safety and efficiency of traffic. However, you may have noticed that your car can go faster than the speed limit, sometimes much faster.

799 views

3 mins read

Automotive Engineering Driving Tips 7 months ago

Slippery Roads: The Ultimate Guide to Safe Driving

Driving on slippery roads can be very dangerous, especially in winter. Slippery roads can make your car skid, spin, or slide out of control, and cause serious accidents. Therefore, it is important to know how to drive safely on slippery roads and avoid any risks.

694 views

2 mins read

Automotive Engineering Driving Tips 7 months ago

What Depth of Water Can I Drive Through With My Car?

Driving through water can be a dangerous situation for any driver. However, by knowing the depth of water that you can drive through with your car, and following some simple tips, you can reduce the risk of damaging your car or getting into trouble.

982 views

4 mins read

Automotive Engineering Driving Tips 7 months ago

Why You Need to Press the Brake Pedal When Shifting from P to D in Automatic Transmission

If you have a car with an automatic transmission, you may have noticed that you need to press the brake pedal when shifting from park (P) to drive (D) or reverse (R). This is not a random requirement, but a safety feature that prevents your car from moving unexpectedly or accidentally.

2162 views

3 mins read

Automotive Engineering Driving Tips 7 months ago

What Is The Best Gear To Apply When Driving Downhill?

You may wonder what is the best gear to apply when driving downhill to maintain control of your vehicle and avoid overheating your brakes.

3318 views

3 mins read

Automotive Engineering Driving Tips 8 months ago

What is the Purpose of Hazard Lights and How to Use Them Properly

Hazard lights are flashing lights on a vehicle that indicate to other drivers that the vehicle is experiencing some kind of problem or emergency.

2717 views

2 mins read

Automotive Engineering Driving Tips 8 months ago

How to Drive a Stick Shift Smoothly Without Jerking While Shifting Gears

Smooth stick shift driving requires precise clutch control and throttle coordination. Gradually release the clutch while gently applying throttle, smoothly transitioning between gears to avoid jerky movements and maintain vehicle stability.

9165 views

4 mins read

Automotive Engineering Driving Tips 8 months ago

Is it bad to brake while cruise control is enabled?

The short answer is no, it's not bad to brake while cruise control is enabled. In fact, it's a default setting in most cars to disable cruise control when you press the brake pedal.

1769 views

3 mins read